etc: permanent location for installer glue

etc/rc.initial

@@ -144,9 +144,9 @@ case ${opmode} in
 		;;
 99)
 		if [ -e /dev/ukbd0 ]; then
-			env TERM=cons25 /scripts/lua_installer
+			env TERM=cons25 /usr/local/installer/lua_installer
 		else
-			/scripts/lua_installer
+			/usr/local/installer/lua_installer
 		fi
 		;;
 100)

usr/local/etc/rc.bootup

@@ -60,11 +60,11 @@ function rescue_detect_keypress() {
 	if (in_array($key, array("r", "R"))) {
 	  putenv("TERM=cons25");
 	  echo "\n\nRecovery mode selected...\n";
-	  passthru("/usr/bin/env TERM=cons25 /bin/tcsh -c /scripts/lua_installer_rescue");
+	  passthru("/usr/bin/env TERM=cons25 /bin/tcsh -c /usr/local/installer/lua_installer_rescue");
 	} elseif (in_array($key, array("i", "I"))) {
 	  putenv("TERM=cons25");
 	  echo "\n\nInstaller mode selected...\n";
-	  passthru("/usr/bin/env TERM=cons25 /bin/tcsh -c /scripts/lua_installer");
+	  passthru("/usr/bin/env TERM=cons25 /bin/tcsh -c /usr/local/installer/lua_installer");
 	  if(file_exists("/tmp/install_complete")) {
 		passthru("/etc/rc.reboot");
 		exit;

usr/local/etc/rc.cdrom

@@ -15,7 +15,7 @@ for i in tmp varmfs etcmfs; do
 done
 
 # Start PFI
-/bin/sh /scripts/pfi start
+/bin/sh /usr/local/installer/pfi start
 
 # If PFI did not find a config, we should create
 # a tiny mfs under /conf and populate with stock

usr/local/installer/after_installation_routines.sh

+#!/bin/sh
+
+# Copy the current running systems config.xml to the target installation area.
+mkdir -p /mnt/cf/conf
+cp -r /cf/conf/* /mnt/cf/conf/
+touch /mnt/cf/conf/trigger_initial_wizard
+
+# Updating boot loader
+echo autoboot_delay=\"3\" >> /mnt/boot/loader.conf
+echo vm.kmem_size=\"435544320\"  >> /mnt/boot/loader.conf
+echo vm.kmem_size_max=\"535544320\"  >> /mnt/boot/loader.conf
+
+echo kern.ipc.nmbclusters=\"0\" >> /mnt/boot/loader.conf
+
+# Hide usbus# from network interfaces list on pfSense >= 2.1
+VERSION=`head -n 1 /mnt/etc/version | cut -c 1-3`; if [ "${VERSION}" != "1.2" -a "${VERSION}" != "2.0" ]; then echo hw.usb.no_pf=\"1\" >> /mnt/boot/loader.conf; fi;
+
+# Set platform back to pfSense to prevent freesbie_1st from running
+echo "pfSense" > /mnt/usr/local/etc/platform
+
+# Let parent script know that a install really happened
+touch /tmp/install_complete
+
+chmod a-w /mnt/boot/loader.rc
+chflags schg /mnt/boot/loader.rc
+
+mkdir -p /mnt/var/installer_logs
+cp /tmp/install.disklabel /mnt/var/installer_logs
+cp /tmp/install.disklabel* /mnt/var/installer_logs
+cp /tmp/installer.log /mnt/var/installer_logs
+cp /tmp/install-session.sh /mnt/var/installer_logs
+cp /tmp/new.fdisk /mnt/var/installer_logs
+
+mkdir -p /mnt/var/db/pkg
+cd /var/db/pkg ; tar -cpf - . | (cd /mnt/var/db/pkg ; tar -xpf -)
+
+# If the platform is vmware, lets do some fixups.
+if [ -f /var/IS_VMWARE ]; then echo "" >> /mnt/etc/sysctl.conf; echo "kern.timecounter.hardware=i8254" >> /mnt/etc/sysctl.conf;  echo kern.hz="100" >> /mnt/boot/loader.conf; fi;
+
+# Fixup permissions on installed files
+if [ -f /etc/installed_filesystem.mtree ]; then /usr/sbin/mtree -U -e -q -f /etc/installed_filesystem.mtree -p /mnt/ > /mnt/conf/mtree.log; fi;
+
+#Sync disks
+/bin/sync

usr/local/installer/cleargpt.sh

+#!/bin/sh
+DISK=$1
+if [ "$DISK" = "" ]; then
+	echo "You must specify the disk that should be formatted/cleared."
+	exit 1
+fi
+for PART in `gpart show $DISK | grep -v '=>' | awk '{ print $3 }'`; do
+	if [ "$PART" != "" ]; then
+		/sbin/gpart delete -i $PART $DISK >/dev/null
+	fi
+done
+/sbin/gpart destroy $DISK >/dev/null
+exit 0

usr/local/installer/lua_installer

+#!/bin/sh
+#
+#   Launch BSD Installer with fake "installer root"
+#   Copyright 2004-2009 Scott Ullrich
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions are met:
+#   
+#   1. Redistributions of source code must retain the above copyright notice,
+#      this list of conditions and the following disclaimer.
+#   
+#   2. Redistributions in binary form must reproduce the above copyright
+#      notice, this list of conditions and the following disclaimer in the
+#      documentation and/or other materials provided with the distribution.
+#   
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+#   INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+#   AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+#   AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+#   OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+#   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+#   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+#   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+#   POSSIBILITY OF SUCH DAMAGE.
+
+product=`cat /usr/local/etc/inc/globals.inc | grep product_name | cut -d'"' -f4`
+factory_shipped_password=`cat /usr/local/etc/inc/globals.inc | grep factory_shipped_password | cut -d'"' -f4`
+factory_shipped_username=`cat /usr/local/etc/inc/globals.inc | grep factory_shipped_username | cut -d'"' -f4`
+
+echo
+echo "Launching ${product} Installer..."
+echo
+
+# Ensure install-session.sh exists where the installtion was recorded to
+touch /tmp/install-session.sh
+
+/sbin/sysctl kern.geom.debugflags=16
+/sbin/sysctl net.link.ether.inet.log_arp_wrong_iface=0 >/dev/null
+
+/sbin/ifconfig lo0 127.0.0.1/24
+/sbin/ifconfig lo0 up
+
+# Check if host is running on VMware -- early boot
+if [ `dmesg -a | grep VMware | wc -l` -gt 0 ]; then
+	touch /var/IS_VMWARE
+fi
+
+# Check if host is running on VMware
+if [ -f /var/log/dmesg.boot ]; then
+	if [ `cat /var/log/dmesg.boot | /usr/bin/grep VMware | /usr/bin/wc -l` -gt 0 ]; then
+		echo -n "VMware detected.  The installer will make changes to tune this host."
+	        touch /var/IS_VMWARE
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo "."
+	fi
+
+	# Check if host is running on pfSenseDEV
+	if [ `/sbin/sysctl -n kern.bootfile | /usr/bin/grep pfSense_Dev | /usr/bin/wc -l` -gt 0 ]; then
+		echo -n "${product} developer iso detected."
+	        touch /var/pfSenseDEV
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo "."
+	fi
+
+	if [ -f /var/run/dmesg.boot ]; then
+		ln -s /var/log/dmesg.boot /var/run/dmesg.boot
+	fi
+fi
+
+echo "One moment please..."
+echo
+
+echo -n "LUA_CPATH='/usr/local/lib/lua/5.0/?.so' exec /usr/local/bin/lua50 -l/usr/local/share/lua/5.0/compat-5.1.lua " > /tmp/lua50c51
+
+echo "/usr/local/share/dfuibe_lua/main.lua \
+/usr/local/share/dfuibe_lua/conf/BSDInstaller.lua \
+/usr/local/share/dfuibe_lua/conf/FreeBSD.lua \
+/usr/local/share/dfuibe_lua/conf/pfSense.lua " >> /tmp/lua50c51
+
+#/sbin/conscontrol mute on >/dev/null 2>&1
+
+sh /tmp/lua50c51 >/dev/null 2>&1 &
+
+sleep 1
+
+echo Launching Installer NCurses frontend...
+/usr/local/sbin/dfuife_curses
+
+#/sbin/conscontrol mute off >/dev/null 2>&1
+
+if [ ! -f /tmp/install_complete ]; then
+	echo Installation did not finish correctly.
+	exit
+fi
+
+clear
+
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo "${product} is now rebooting"
+echo
+echo "After the reboot is complete, open a web browser and"
+echo "enter https://192.168.1.1 (or the LAN IP Address) in the"
+echo "location bar."
+echo
+echo "You might need to acknowledge the HTTPS certificate if "
+echo "your browser reports it as untrusted.  This is normal"
+echo "as a self-signed certificate is used by default."
+echo
+echo "*DEFAULT Username*: ${factory_shipped_username}"
+echo "*DEFAULT Password*: ${factory_shipped_password}"
+echo
+
+echo Rebooting in 5 seconds.  CTRL-C to abort.
+sleep 1
+echo Rebooting in 4 seconds.  CTRL-C to abort.
+sleep 1
+echo Rebooting in 3 seconds.  CTRL-C to abort.
+sleep 1
+echo Rebooting in 2 seconds.  CTRL-C to abort.
+sleep 1
+echo Rebooting in 1 second..  CTRL-C to abort.
+sleep 1
+echo
+echo ${product} is now rebooting.
+echo
+
+reboot
+

usr/local/installer/lua_installer_rescue

+#!/bin/sh
+#
+#   Launch BSD Installer with fake "installer root"
+#   Copyright 2004-2009 Scott Ullrich
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions are met:
+#   
+#   1. Redistributions of source code must retain the above copyright notice,
+#      this list of conditions and the following disclaimer.
+#   
+#   2. Redistributions in binary form must reproduce the above copyright
+#      notice, this list of conditions and the following disclaimer in the
+#      documentation and/or other materials provided with the distribution.
+#   
+#   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+#   INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+#   AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+#   AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+#   OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+#   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+#   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+#   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+#   POSSIBILITY OF SUCH DAMAGE.
+
+product=`cat /usr/local/etc/inc/globals.inc | grep product_name | cut -d'"' -f4`
+factory_shipped_password=`cat /usr/local/etc/inc/globals.inc | grep factory_shipped_password | cut -d'"' -f4`
+factory_shipped_username=`cat /usr/local/etc/inc/globals.inc | grep factory_shipped_username | cut -d'"' -f4`
+
+echo
+echo "Launching ${product} Installer config.xml rescue..."
+echo
+echo "One moment please..."
+echo
+
+# Ensure install-session.sh exists where the installtion was recorded to
+touch /tmp/install-session.sh
+
+/sbin/sysctl kern.geom.debugflags=16
+/sbin/sysctl net.link.ether.inet.log_arp_wrong_iface=0 >/dev/null
+
+/sbin/ifconfig lo0 127.0.0.1/24
+/sbin/ifconfig lo0 up
+
+# Check if host is running on VMware
+if [ -f /var/log/dmesg.boot ]; then
+	if [ `cat /var/log/dmesg.boot | /usr/bin/grep VMware | /usr/bin/wc -l` -gt 0 ]; then
+		echo -n "VMware detected.  The installer will make changes to tune this host."
+	        touch /var/IS_VMWARE
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo "."
+	fi
+
+	# Check if host is running on pfSenseDEV
+	if [ `/sbin/sysctl -n kern.bootfile | /usr/bin/grep pfSense_Dev | /usr/bin/wc -l` -gt 0 ]; then
+		echo -n "${product} developer iso detected."
+        	touch /var/pfSenseDEV
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo -n "."
+		sleep 1
+		echo "."
+	fi
+
+	if [ -f /var/run/dmesg.boot ]; then
+		ln -s /var/log/dmesg.boot /var/run/dmesg.boot
+	fi
+fi
+
+echo Launching LUA Installer...
+echo -n "LUA_CPATH='/usr/local/lib/lua/5.0/?.so' exec /usr/local/bin/lua50 -l/usr/local/share/lua/5.0/compat-5.1.lua " > /tmp/lua50c51
+
+echo "/usr/local/share/dfuibe_lua/main.lua \
+/usr/local/share/dfuibe_lua/conf/BSDInstaller.lua \
+/usr/local/share/dfuibe_lua/conf/FreeBSD.lua \
+/usr/local/share/dfuibe_lua/conf/pfSense_rescue.lua " >> /tmp/lua50c51
+
+#/sbin/conscontrol mute on >/dev/null 2>&1
+
+sh /tmp/lua50c51 >/dev/null 2>&1 &
+
+sleep 1
+
+echo Launching Installer NCurses frontend...
+/usr/local/sbin/dfuife_curses
+
+#/sbin/conscontrol mute off >/dev/null 2>&1
+
+if [ ! -f /tmp/install_complete ]; then
+	echo Installation did not finish correctly.
+	exit
+fi
+
+clear
+
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo
+echo "${product} is now rebooting"
+echo
+echo "After the reboot is complete, open a web browser and"
+echo "enter http://192.168.1.1 (or the LAN IP Address) in the"
+echo "location bar."
+echo
+echo "*DEFAULT Username*: ${factory_shipped_username}"
+echo "*DEFAULT Password*: ${factory_shipped_password}"
+echo
+
+echo Rebooting in 5 seconds.  CTRL-C to abort.
+sleep 1
+echo Rebooting in 4 seconds.  CTRL-C to abort.
+sleep 1
+echo Rebooting in 3 seconds.  CTRL-C to abort.
+sleep 1
+echo Rebooting in 2 seconds.  CTRL-C to abort.
+sleep 1
+echo Rebooting in 1 second..  CTRL-C to abort.
+sleep 1
+echo
+echo ${product} is now rebooting.
+echo
+
+reboot
+

usr/local/installer/pfi

+#!/bin/sh
+
+# $Id$
+# $DragonFly: src/nrelease/installer/etc/rc.d/pfi,v 1.2 2004/07/11 18:55:20 cpressey Exp $
+#
+
+# PROVIDE: pfi
+# REQUIRE: mountoptional
+# KEYWORD: FreeBSD
+
+. /etc/rc.subr
+
+name=pfi
+start_cmd="pfi_start"
+stop_cmd=":"
+thttpd_location="/scripts/thttpd"
+
+touch /etc/rc.conf
+
+get_config_xml()
+{
+	if [ -r $1/conf/config.xml ]; then
+		echo -n "[config.xml on $1]"
+		# Now that we have found config.xml lets mount
+		# the device in nullfs under /cf/conf and /conf
+		mount_nullfs /tmp/mnt/cf /cf
+		mount_nullfs /tmp/mnt/cf/conf /conf
+		if [ ! -r /cf/conf/config.xml ]; then
+			echo
+			echo "Something went wrong.  Launching shell!";
+			/bin/sh
+		fi
+		echo
+		return 0
+	else
+		return 1
+	fi
+}
+
+look_for_config_xml_config_msdos()
+{
+	mkdir -p /tmp/mnt/cf
+	echo -n "Looking for config.xml on "
+	for try_device in da0 da0s1 da1 da1s1 da2 da2s1 da3 da3s1 da4 da4s1 da5 da5s1 fd0 fd1; do
+		if [ ! -e /dev/${try_device} ]; then
+			continue
+		fi
+		echo -n "$try_device "
+		if mount -t msdos /dev/$try_device /tmp/mnt/cf 2>/dev/null ; then
+			echo -n "[found msdos] "
+			# Note for later that this device is capable
+			# of having config.xml on it for perm. storage
+			/bin/mkdir -p /var/db/pfi/
+			/usr/bin/touch /var/db/pfi/capable_${try_device}
+			# look for config.xml, if its found return 0
+			if get_config_xml /tmp/mnt/cf /dev/$try_device; then
+			    return 0
+			fi
+		fi
+	done
+	echo "done."
+	return 1
+}
+
+get_pfi_config()
+{
+	[ -r /etc/pfi.conf ] && return 0
+
+	if [ -r $1/pfi.conf ]; then
+		echo -n "Found pfi.conf on $1"
+		tr -d "\r" < $1/pfi.conf > /etc/pfi.conf
+		echo "pfi_found_on_device='$2'" >> /etc/pfi.conf
+		echo "#@@@@@" >>/etc/rc.conf
+		cat /etc/pfi.conf >>/etc/rc.conf
+		if [ -r /etc/defaults/pfi.conf ]; then
+			. /etc/defaults/pfi.conf
+		fi
+		. /etc/pfi.conf
+		if [ "$pfi_script" != "" -a -x "$1/$pfi_script" ]; then
+			$1/$pfi_script
+		fi
+		return 0
+	else
+		return 1
+	fi
+}
+
+get_authorized_hosts()
+{
+	[ -r /root/authorized_hosts ] && return 0
+	if [ -r $1/authorized_hosts ]; then
+		echo "Authorized_hosts found on $1"
+		mkdir -p ~root/.ssh/
+		tr -d "\r" < $1/authorized_hosts > /root/.ssh/authorized_hosts
+	fi
+}
+
+look_for_pfi_config_msdos()
+{
+	[ -r /etc/pfi.conf ] && return 0
+	echo -n "Looking for pfi.conf on "
+	for try_device in da0 da1 da0s1 da1s1 fd0 fd1; do
+		if [ ! -e /dev/${try_device} ]; then
+			continue
+		fi
+		echo -n "${try_device} "
+		if mount -t msdos -o rdonly /dev/$try_device /tmp/mnt 2>/dev/null ; then
+			echo -n "[found] "
+			get_authorized_hosts
+			if get_pfi_config /tmp/mnt /dev/$try_device; then
+				umount /tmp/mnt
+				echo -n "[found] "
+				return 0
+			fi
+			umount /tmp/mnt
+		fi
+	done
+	echo "done. "
+	return 1
+}
+
+look_for_pfi_config_cd9660()
+{
+	[ -r /etc/pfi.conf ] && return 0
+	echo -n "Looking for pfi.conf on "
+	for try_device in acd0c; do
+		echo -n "${try_device} "
+		if [ ! -e /dev/${try_device} ]; then
+			echo "done. "
+			return 1
+			#( cd /dev && ./MAKEDEV ${try_device} )
+		fi
+		if mount_cd9660 /dev/$try_device /tmp/mnt ; then
+			echo -n "[found] "
+			get_authorized_hosts
+			if get_pfi_config /tmp/mnt /dev/$try_device; then
+				umount /tmp/mnt
+				echo -n "[found]" 
+				return 0
+			fi
+			umount /tmp/mnt
+		fi
+	done
+	return 1
+}
+
+pfi_start()
+{
+
+	# Get the pfi.conf file off the pfi media and into /etc/pfi.conf.
+
+	look_for_pfi_config_cd9660
+	look_for_pfi_config_msdos
+        look_for_config_xml_config_msdos    # look for pfsense config.xml
+
+	if [ ! -r /etc/pfi.conf ]; then
+		echo '' >/etc/pfi.conf
+	fi
+
+	if [ -r /etc/defaults/pfi.conf ]; then
+		. /etc/defaults/pfi.conf
+	fi
+	. /etc/pfi.conf
+
+	# We can perform any pre-install tasks here by
+	# examining the contents of pfi_* variables.
+
+	# Interpret pfi_sshd_* options.  These basically add settings
+	# to /etc/ssh/sshd_config; it is assumed "sshd" will appear
+	# in pfi_rc_actions to restart sshd.
+
+	case ${pfi_sshd_permit_root_login} in
+	YES)
+		echo "PermitRootLogin yes" >> /etc/ssh/sshd_config
+		;;
+	without-password)
+		echo "PermitRootLogin without-password" >> /etc/ssh/sshd_config
+		;;
+	forced-commands-only)
+		echo "PermitRootLogin forced-commands-only" >> /etc/ssh/sshd_config
+		;;
+	*)
+		;;
+	esac
+
+	case ${pfi_sshd_permit_empty_passwords} in
+	YES)
+		echo "PermitEmptyPasswords yes" >> /etc/ssh/sshd_config
+		;;
+	*)
+		;;
+	esac
+
+	# Interpret pfi_set_root_password.  If it is not empty, use
+	# it to set root's LiveCD password.
+
+	if [ "X$pfi_set_root_password" != "X" ]; then
+		echo "$pfi_set_root_password" | \
+		    /usr/sbin/pw usermod root -h 0
+	fi
+
+	# The most important pre-install task is to restart
+	# any RCNG scripts listed in pfi_rc_actions with any new
+	# settings that might have been set up by pfi.conf.
+
+	if [ "X$pfi_rc_actions" != "X" ]; then
+		rev_actions=`reverse_list $pfi_rc_actions`
+
+		for _rc_elem in ${rev_actions}; do
+			echo "Stopping ${_rc_elem}..."
+			/etc/rc.d/${_rc_elem} stop
+			#rcstop ${_rc_elem}
+		done
+		for _rc_elem in ${pfi_rc_actions}; do
+			echo "Starting ${_rc_elem}..."
+			/etc/rc.d/${_rc_elem} start
+			#rcstart ${_rc_elem}
+		done
+	fi
+
+	# Now remove the copy of pfi.conf that we tacked onto
+	# the end of rc.conf so the above would work
+
+	awk '$1=="#@@@@@" || cut { cut = 1 } !cut { print $0 }' \
+	    </etc/rc.conf >/etc/rc.conf.new
+	mv /etc/rc.conf.new /etc/rc.conf
+
+	# Set up auto-login if requested.
+
+	if [ "X$pfi_autologin" != "XNONE" ]; then
+		echo 'autologin|al.9600:\' >> /etc/gettytab
+		echo "        :al=${pfi_autologin}:tc=std.9600:" >> /etc/gettytab
+		sed -i '' 's/^ttyv0=.*/ttyv0 "\/usr\/libexec\/getty Al" cons25 on secure/' /etc/ttys
+	fi
+
+	# Finally, start thttpd if the user wants to use
+	# the cgi frontend.
+
+	if [ "X$pfi_frontend" = "Xcgi" ]; then
+		echo "Starting thttpd..."
+		echo dir=/usr/local/www > /tmp/thttpd.conf
+		echo user=root >> /tmp/thttpd.conf
+		echo cgipat=*.cgi >> /tmp/thttpd.conf
+		echo logfile=/var/log/thttpd.log >> /tmp/thttpd.conf
+		echo pidfile=/var/run/thttpd.pid >> /tmp/thttpd.conf
+		$thttpd_location -C /tmp/thttpd.conf
+	fi
+}
+
+load_rc_config $name
+run_rc_command "$1"
+