Skip to content

L
lang
Commit 2e4cab96 authored by Franco Fichtner's avatar Franco Fichtner
Browse files
Options

dymanic: regenerate dynamic files 

Good step forward, now we can easily review changes.  HTML is currently
left out because it is hard to maintain.  See ticket #1 for details.
parent 4868bec3
Hide whitespace changes
Inline Side-by-side
Showing with 600 additions and 545 deletions
dynamic/helpers/acl.php
View file @ 2e4cab96
<?php
/**
* Copyright (C) 2015 Deciso B.V.
*
......@@ -32,206 +33,208 @@
* Language support, autogenerated file
*
*/
echo gettext('Allow access to the \'Status: IPsec: SAD\' page.');
echo gettext('Allow access to the \'VPN: PPTP: Users\' page.');
echo gettext('Allow access to the \'System: Authentication Servers\' page.');
echo gettext('Allow access to \'Interfaces: QinQ: Edit\' page');
echo gettext('Allow access to all pages');
echo gettext('Allow access to all pages required for the dashboard.');
echo gettext('Allow access to the \'AJAX: Get Stats\' page.');
echo gettext('Allow access to the \'AJAX: Service Providers\' page.');
echo gettext('Allow access to the \'Diagnostics: ARP Table\' page.');
echo gettext('Allow access to the \'Diagnostics: Authentication\' page.');
echo gettext('Allow access to the \'Diagnostics: Backup/restore\' page.');
echo gettext('Allow access to the \'Diagnostics: Configuration History\' page.');
echo gettext('Allow access to the \'Diagnostics: Factory defaults\' page.');
echo gettext('Allow access to the \'Diagnostics: Halt system\' page.');
echo gettext('Allow access to the \'Diagnostics: Interface Traffic\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: DHCP\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: Firewall: Dynamic View\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: Firewall: Normal View\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: Firewall: Plain View\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: Firewall: Summary View\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: L2TP\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: PPPoE\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: PPTP\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: Settings\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: System\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: System: Gateways\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: System: Resolver\' page.');
echo gettext('Allow access to the \'Diagnostics: NDP Table\' page.');
echo gettext('Allow access to the \'Diagnostics: Packet Capture\' page.');
echo gettext('Allow access to the \'Diagnostics: Ping\' page.');
echo gettext('Allow access to the \'Diagnostics: Reboot System\' page.');
echo gettext('Allow access to the \'Diagnostics: Reset state\' page.');
echo gettext('Allow access to the \'Diagnostics: Routing tables\' page.');
echo gettext('Allow access to the \'Diagnostics: Show States\' page.');
echo gettext('Allow access to the \'Diagnostics: Sockets\' page.');
echo gettext('Allow access to the \'Diagnostics: States Summary\' page.');
echo gettext('Allow access to the \'VPN: PPTP: User: Edit\' page.');
echo gettext('Show all items on help menu');
echo gettext('Allow access to the \'System: Firmware: Settings\' page.');
echo gettext('Allow access to the \'System: User Manager: Add Privileges\' page.');
echo gettext('Allow access to the \'Services: NTP\' page.');
echo gettext('Allow access to the \'VPN: OpenVPN: Client Specific Override\' page.');
echo gettext('Allow access to the \'VPN: OpenVPN: Client\' page.');
echo gettext('Allow access to the \'Interfaces: Assign network ports\' page.');
echo gettext('Allow access to the \'Diagnostics: Tables\' page.');
echo gettext('Allow access to the \'Diagnostics: Test Port\' page.');
echo gettext('Allow access to the \'Diagnostics: Traceroute\' page.');
echo gettext('Allow access to the \'Firewall: Alias: Edit\' page.');
echo gettext('Allow access to the \'Firewall: Alias: Import\' page.');
echo gettext('Allow access to the \'Firewall: Aliases\' page.');
echo gettext('Allow access to the \'Firewall: Easy Rule\' add/status page.');
echo gettext('Allow access to the \'Firewall: NAT: 1:1\' page.');
echo gettext('Allow access to the \'Firewall: NAT: 1:1: Edit\' page.');
echo gettext('Allow access to the \'Firewall: NAT: NPT\' page.');
echo gettext('Allow access to the \'Firewall: NAT: NPT: Edit\' page.');
echo gettext('Allow access to the \'Firewall: NAT: Outbound\' page.');
echo gettext('Allow access to the \'Firewall: NAT: Outbound: Edit\' page.');
echo gettext('Allow access to the \'Firewall: NAT: Port Forward\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Pre-Shared Keys List\' page.');
echo gettext('Create interface groups');
echo gettext('Allow access to the \'Interfaces: VLAN: Edit\' page.');
echo gettext('Allow access to the \'Diagnostics: Reboot System\' page.');
echo gettext('Allow access to the \'Load Balancer: Pool: Edit\' page.');
echo gettext('Allow access to the \'System: User Manager\' page.');
echo gettext('Allow access to the \'Services: DHCPv6 Server : Edit static mapping\' page.');
echo gettext('Allow access to the \'Load Balancer: Pool\' page.');
echo gettext('Allow access to the \'VPN: L2TP: Users : Edit\' page.');
echo gettext('Allow access to the \'Firewall: NAT: Port Forward: Edit\' page.');
echo gettext('Allow access to the \'Firewall: Rules\' page.');
echo gettext('Allow access to the \'Firewall: Rules: Edit\' page.');
echo gettext('Allow access to the \'Firewall: Schedules\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: Settings\' page.');
echo gettext('Allow access to the \'Service: Universal Plug and Play\' page.');
echo gettext('Allow access to the \'Firewall: Schedules: Edit\' page.');
echo gettext('Allow access to the \'Firewall: Traffic Shaper\' page.');
echo gettext('Allow access to the \'Firewall: Virtual IP Address: Edit\' page.');
echo gettext('Allow access to the \'Firewall: Virtual IP Addresses\' page.');
echo gettext('Allow access to the \'System: Firmware: Manual Update\' page.');
echo gettext('Allow access to the \'Status: Services\' page.');
echo gettext('Allow access to the \'Status: IPsec: Leases\' page.');
echo gettext('Allow access to the \'Services: DNS Forwarder: Edit Domain Override\' page.');
echo gettext('Allow access to the \'Interfaces\' page.');
echo gettext('Allow access to the \'Interfaces: Assign network ports\' page.');
echo gettext('Allow access to the \'Interfaces: Bridge : Edit\' page.');
echo gettext('Allow access to the \'Interfaces: Bridge\' page.');
echo gettext('Allow access to the \'Interfaces: GIF\' page.');
echo gettext('Allow access to the \'Interfaces: GIF: Edit\' page.');
echo gettext('Allow access to the \'Interfaces: GRE\' page.');
echo gettext('Allow access to the \'Interfaces: GRE: Edit\' page.');
echo gettext('Allow access to the \'Interfaces: Groups: Edit\' page.');
echo gettext('Allow access to the \'Interfaces: LAGG: Edit\' page.');
echo gettext('Allow access to the \'Interfaces: PPPs\' page.');
echo gettext('Allow access to the \'Firewall: NAT: 1:1\' page.');
echo gettext('Indicates whether the user is allowed to use the proxy');
echo gettext('Allow access to the \'Status: System logs: IPsec VPN\' page.');
echo gettext('Allow access to the \'Interfaces: PPPs: Edit\' page.');
echo gettext('Allow access to the \'Interfaces: QinQ\' page.');
echo gettext('Allow access to the \'Interfaces: VLAN\' page.');
echo gettext('Allow access to the \'Interfaces: VLAN: Edit\' page.');
echo gettext('Allow access to the \'Interfaces: Wireless : Edit\' page.');
echo gettext('Allow access to the \'Interfaces: Wireless\' page.');
echo gettext('Allow access to the \'Load Balancer: Pool\' page.');
echo gettext('Allow access to the \'Load Balancer: Pool: Edit\' page.');
echo gettext('Allow access to the \'Load Balancer: Virtual Server: Edit\' page.');
echo gettext('Allow access to the \'Lobby: Login / Logout/ Dashboard\' page.');
echo gettext('Allow access to the \'Service: Universal Plug and Play\' page.');
echo gettext('Allow access to the \'Services: Captive Portal\' page.');
echo gettext('Allow access to the \'Services: DHCP Relay\' page.');
echo gettext('Allow access to the \'Services: DHCP Server : Edit static mapping\' page.');
echo gettext('Allow access to the \'Services: DHCP server\' page.');
echo gettext('Allow access to the \'Services: DHCPv6 Relay\' page.');
echo gettext('Allow access to the \'Services: DHCPv6 Server : Edit static mapping\' page.');
echo gettext('Allow access to the \'Services: DHCPv6 server\' page.');
echo gettext('Allow access to the \'Status: System logs: Load Balancer\' page.');
echo gettext('Allow access to the \'Lobby: Login / Logout/ Dashboard\' page.');
echo gettext('Allow access to the \'Services: DNS Filter\' page.');
echo gettext('Allow access to the \'Services: DNS Forwarder\' page.');
echo gettext('Allow access to the \'Services: DNS Forwarder: Edit Domain Override\' page.');
echo gettext('Allow access to the \'Services: DNS Forwarder: Edit host\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver: Access Lists\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver: Access Lists: Edit\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver: Advanced\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver: Edit Domain Override\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver: Edit host\' page.');
echo gettext('Allow access to the \'Services: SNMP\' page.');
echo gettext('Allow access to the \'Settings: Load Balancer: Settings\' page.');
echo gettext('Allow access to the \'Diagnostics: Show States\' page.');
echo gettext('Allow access to the \'VPN: OpenVPN: Client Export Utility\' page.');
echo gettext('Indicates whether the user is able to login for example via SSH.');
echo gettext('Allow access to the \'Status: Traffic Graph\' page.');
echo gettext('Allow access to the \'Firewall: Aliases\' page.');
echo gettext('Allow access to the \'Services: Dynamic DNS client\' page.');
echo gettext('Allow access to the \'Services: Dynamic DNS clients\' page.');
echo gettext('Allow access to the \'Services: HAProxy\' page.');
echo gettext('Allow access to the \'Services: Igmpproxy\' page.');
echo gettext('Allow access to the \'Services: Igmpproxy: Edit\' page.');
echo gettext('Allow access to the \'Services: Intrusion Detection\' page.');
echo gettext('Allow access to the \'Services: Load Balancer: Monitor: Edit\' page.');
echo gettext('Allow access to the \'System: CRL Manager\' page.');
echo gettext('Allow access to the \'Diagnostics: Interface Traffic\' page.');
echo gettext('Allow access to the \'System: Firmware: Auto Update\' page.');
echo gettext('Allow access to the \'Diagnostics: Sockets\' page.');
echo gettext('Allow access to the \'Status: Universal Plug and Play\' page.');
echo gettext('Allow access to the \'Services: Load Balancer: Monitors\' page.');
echo gettext('Allow access to the \'Services: Load Balancer: Virtual Servers\' page.');
echo gettext('Allow access to the \'Services: NTP\' page.');
echo gettext('Allow access to the \'Services: PPPoE Server\' page.');
echo gettext('Allow access to the \'Status: System logs: OpenVPN\' page.');
echo gettext('Allow access to the \'Status: OpenVPN\' page.');
echo gettext('Allow access to the \'Services: PPPoE Server: Edit\' page.');
echo gettext('Allow access to the \'Services: Proxy\' page.');
echo gettext('Allow access to the \'Services: RFC 2136 clients\' page.');
echo gettext('Uploads crash reports to the developers.');
echo gettext('Allow access to the \'Firewall: Alias: Edit\' page.');
echo gettext('Allow access to the \'Interfaces: PPPs: Edit\' page.');
echo gettext('Allow access to the \'Firewall: NAT: NPT\' page.');
echo gettext('Allow access to the \'Interfaces: GIF: Edit\' page.');
echo gettext('Allow access to the \'VPN: IPsec\' page.');
echo gettext('Allow access to the \'Load Balancer: Virtual Server: Edit\' page.');
echo gettext('Allow access to the \'Status: System logs: NTP\' page.');
echo gettext('Allow access to the \'Interfaces: GRE\' page.');
echo gettext('Allow access to the \'Services: Router Advertisements\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Edit Phase 2\' page.');
echo gettext('Allow access to the \'System: Advanced: Networking\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Edit Phase 1\' page.');
echo gettext('Allow access to the \'Interfaces: VLAN\' page.');
echo gettext('Allow access to the \'Firewall: NAT: Port Forward: Edit\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver: Edit Domain Override\' page.');
echo gettext('Allow access to the \'Firewall: Alias: Import\' page.');
echo gettext('Allow access to the \'Diagnostics: Reset state\' page.');
echo gettext('Allow access to the \'Services: SMART\' page.');
echo gettext('Allow access to the \'Services: SNMP\' page.');
echo gettext('Allow access to the \'Services: Wake on LAN\' page.');
echo gettext('Allow access to the \'Services: Wake on LAN: Edit\' page.');
echo gettext('Allow access to the \'Firewall: Virtual IP Address: Edit\' page.');
echo gettext('Allow access to the \'Diagnostics: Routing tables\' page.');
echo gettext('Allow access to the \'System: Advanced: Admin Access\' page.');
echo gettext('Allow access to the \'Status: System logs: System: Routing\' page.');
echo gettext('Allow access to the \'Status: Interfaces\' page.');
echo gettext('Allow access to the \'Services: DNS Forwarder\' page.');
echo gettext('Allow access to the \'Status: Gateways\' page.');
echo gettext('Allow access to the \'Settings: Load Balancer: Settings\' page.');
echo gettext('Allow access to the \'Status: CARP\' page.');
echo gettext('Allow access to the \'Status: DHCP leases\' page.');
echo gettext('Allow access to the \'Hidden: Detailed Status\' page.');
echo gettext('Allow access to the \'System: Advanced: Miscellaneous\' page.');
echo gettext('Allow access to the \'AJAX: Service Providers\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: Firewall: Normal View\' page.');
echo gettext('Allow access to the \'Diagnostics: Halt system\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: L2TP\' page.');
echo gettext('Allow access to the \'Services: Igmpproxy: Edit\' page.');
echo gettext('Allow access to the \'System: User Manager: Settings: Test LDAP\' page.');
echo gettext('Allow access to the \'VPN: L2TP\' page.');
echo gettext('Allow access to the \'XMLRPC Library\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: Firewall: Summary View\' page.');
echo gettext('Allow access to the \'Status: IPsec: SPD\' page.');
echo gettext('Allow access to the \'Status: DHCPv6 leases\' page.');
echo gettext('Allow access to the \'Status: Filter Reload Status\' page.');
echo gettext('Allow access to all pages');
echo gettext('Allow access to the \'Firewall: NAT: NPT: Edit\' page.');
echo gettext('Indicates whether the user is allowed to dial in via PPPOE');
echo gettext('Allow access to the \'System: Advanced: Notifications\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: DHCP\' page.');
echo gettext('Allow access to the \'System: Gateway Groups\' page.');
echo gettext('Allow access to the \'Wizard subsystem\' page.');
echo gettext('Allow access to the \'Diagnostics: Restore Full Backup\' page.');
echo gettext('Allow access to the \'Status: CARP\' page.');
echo gettext('Allow access to the \'Diagnostics: Authentication\' page.');
echo gettext('Allow access to the \'VPN: PPTP\' page.');
echo gettext('Allow access to the \'Firewall: Rules\' page.');
echo gettext('Allow access to the \'AJAX: Get Stats\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: System: Gateways\' page.');
echo gettext('Allow access to the \'Services: DHCPv6 Relay\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver: Advanced\' page.');
echo gettext('Allow access to the \'Services: Load Balancer: Virtual Servers\' page.');
echo gettext('Allow access to the \'Status: NTP\' page.');
echo gettext('Allows access to the \'Diagnostics: Limiter Info\' page');
echo gettext('Allow access to the \'Diagnostics: Logs: Firewall: Plain View\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: System: Resolver\' page.');
echo gettext('Allow access to the \'Status: Wireless\' page.');
echo gettext('Allow access to the \'Status: NTP PPS\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: PPTP\' page.');
echo gettext('Allow access to the \'Diagnostics: NanoBSD\' page.');
echo gettext('Allow access to the \'System: CA Manager\' page.');
echo gettext('Allow access to all pages required for the dashboard.');
echo gettext('Allow access to the \'Diagnostics: Patterns\' page.');
echo gettext('Allow access to the \'System: User Password Manager\' page.');
echo gettext('Allow access to \'Interfaces: QinQ: Edit\' page');
echo gettext('Allow access to the \'Firewall: Rules: Edit\' page.');
echo gettext('Allow access to the \'Diagnostics: Packet Capture\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver: Access Lists\' page.');
echo gettext('Allow access to the \'Firewall: NAT: Outbound: Edit\' page.');
echo gettext('Allow access to the \'Status: Gateway Groups\' page.');
echo gettext('Allow access to the \'Status: Gateways\' page.');
echo gettext('Allow access to the \'Status: IPsec\' page.');
echo gettext('Allow access to the \'Interfaces: Wireless : Edit\' page.');
echo gettext('Allow access to the \'Diagnostics: Test Port\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: System\' page.');
echo gettext('Allow access to the \'VPN: L2TP : Users\' page.');
echo gettext('If present, ignores requests from this user to write config.xml.');
echo gettext('Allow access to the \'Interfaces: Groups: Edit\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: Firewall: Dynamic View\' page.');
echo gettext('Allows access to the \'Diagnostics: pfInfo\' page');
echo gettext('Indicates whether the user is allowed to dial in via IPsec xauth (Note: Does not allow shell access, but may allow the user to create ssh tunnels)');
echo gettext('Allow access to the \'Status: System logs: IPsec VPN\' page.');
echo gettext('Allow access to the \'Interfaces: LAGG: Edit\' page.');
echo gettext('Allow access to the \'VPN: OpenVPN: Server\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Mobile\' page.');
echo gettext('Allow access to the \'System: Gateways: Edit Gateway\' page.');
echo gettext('Allow access to the \'Diagnostics: Backup/restore\' page.');
echo gettext('Allow direct access to all Dashboard widget pages, required for some widgets using AJAX.');
echo gettext('Allow access to the \'Status: IPsec: Leases\' page.');
echo gettext('Allow access to the \'Status: IPsec: SAD\' page.');
echo gettext('Allow access to the \'Status: IPsec: SPD\' page.');
echo gettext('Allow access to the \'Status: Interfaces\' page.');
echo gettext('Allow access to the \'Status: Load Balancer: Pool\' page.');
echo gettext('Allow access to the \'Status: Load Balancer: Virtual Server\' page.');
echo gettext('Allow access to the \'Diagnostics: Configuration History\' page.');
echo gettext('Allow access to the \'Interfaces: GRE: Edit\' page.');
echo gettext('Allow access to the \'Status: Gateway Groups\' page.');
echo gettext('Allow access to the \'Services: DHCP server\' page.');
echo gettext('Allow access to the \'Interfaces\' page.');
echo gettext('Allow access to the \'Services: DNS Forwarder: Edit host\' page.');
echo gettext('Allow access to the \'Status: System logs: Captive portal\' page.');
echo gettext('Allow access to the \'System: General Setup\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver: Access Lists: Edit\' page.');
echo gettext('Allow access to the \'Firewall: NAT: 1:1: Edit\' page.');
echo gettext('Allow access to the \'Diagnostics: Tables\' page.');
echo gettext('Allow access to the \'System: Group manager\' page.');
echo gettext('Allow access to the \'System: User Manager: settings\' page.');
echo gettext('Allow access to the \'Status: DHCPv6 leases\' page.');
echo gettext('Edit Interface LAGG');
echo gettext('Allow access to the \'Status: NTP PPS\' page.');
echo gettext('Allow access to the \'Status: NTP Serial GPS\' page.');
echo gettext('Indicates whether the user is allowed to dial in via L2TP');
echo gettext('Allow access to the \'Status: Load Balancer: Pool\' page.');
echo gettext('Allow access to the \'Interfaces: QinQ\' page.');
echo gettext('Allow access to the \'Interfaces: Bridge : Edit\' page.');
echo gettext('Allow access to the \'Interfaces: Wireless\' page.');
echo gettext('Allow access to the \'Services: Dynamic DNS clients\' page.');
echo gettext('Allow access to the \'Status: NTP\' page.');
echo gettext('Allow access to the \'Status: OpenVPN\' page.');
echo gettext('Allow access to the \'Status: Services\' page.');
echo gettext('Allow access to the \'Status: System logs: Captive portal\' page.');
echo gettext('Allow access to the \'Status: System logs: IPsec VPN\' page.');
echo gettext('Allow access to the \'Status: System logs: Load Balancer\' page.');
echo gettext('Allow access to the \'Status: System logs: NTP\' page.');
echo gettext('Allow access to the \'Status: System logs: OpenVPN\' page.');
echo gettext('Allow access to the \'Status: System logs: System: Routing\' page.');
echo gettext('Allow access to the \'Status: System logs: System: Wireless\' page.');
echo gettext('Allow access to the \'Firewall: Schedules: Edit\' page.');
echo gettext('Allow access to the \'Diagnostics: Ping\' page.');
echo gettext('Allow access to the \'Status: Traffic Graph\' page.');
echo gettext('Allow access to the \'Status: Universal Plug and Play\' page.');
echo gettext('Allow access to the \'Status: Wireless\' page.');
echo gettext('Allow access to the \'System: Advanced: Admin Access\' page.');
echo gettext('Allow access to the \'System: Advanced: Firewall and NAT\' page.');
echo gettext('Allow access to the \'System: Advanced: Miscellaneous\' page.');
echo gettext('Allow access to the \'System: Advanced: Networking\' page.');
echo gettext('Allow access to the \'System: Advanced: Notifications\' page.');
echo gettext('Allow access to the \'System: Advanced: Tunables\' page.');
echo gettext('Allow access to the \'System: Authentication Servers\' page.');
echo gettext('Allow access to the \'System: CA Manager\' page.');
echo gettext('Allow access to the \'System: CRL Manager\' page.');
echo gettext('Allow access to the \'System: Certificate Manager\' page.');
echo gettext('Allow access to the \'System: Firmware: Auto Update\' page.');
echo gettext('Allow access to the \'System: Firmware: Manual Update\' page.');
echo gettext('Allow access to the \'System: Gateway Groups\' page.');
echo gettext('Allow access to the \'System: Gateways\' page.');
echo gettext('Allow access to the \'System: Gateways: Edit Gateway Groups\' page.');
echo gettext('Allow access to the \'System: Static Routes: Edit route\' page.');
echo gettext('Allow access to the \'Services: Wake on LAN\' page.');
echo gettext('Allow access to the \'System: License\' page.');
echo gettext('Allow access to the \'Services: DNS Filter\' page.');
echo gettext('Allow access to the \'Services: DNS Resolver\' page.');
echo gettext('Allows access to the \'Diagnostics: pfTop\' page');
echo gettext('Allow access to the \'Interfaces: GIF\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Edit Pre-Shared Keys\' page.');
echo gettext('Allow access to the \'Services: Dynamic DNS client\' page.');
echo gettext('Allow access to the \'Services: PPPoE Server: Edit\' page.');
echo gettext('Allow access to the \'Diagnostics: Logs: PPPoE\' page.');
echo gettext('Allow access to the \'System: Advanced: Tunables\' page.');
echo gettext('Allow access to the \'System: Gateways: Edit Gateway\' page.');
echo gettext('Allow access to the \'System: General Setup\' page.');
echo gettext('Allow access to the \'System: Group Manager: Add Privileges\' page.');
echo gettext('Allow access to the \'Services: Load Balancer: Monitors\' page.');
echo gettext('Indicates whether the user is allowed to dial in via PPTP');
echo gettext('Allow access to the \'Diagnostics: Traceroute\' page.');
echo gettext('Allow access to the \'Firewall: NAT: Outbound\' page.');
echo gettext('Allow access to the \'System: Advanced: Firewall and NAT\' page.');
echo gettext('Allow access to the \'System: Gateways\' page.');
echo gettext('Allow access to the \'Firewall: Easy Rule\' add/status page.');
echo gettext('Allow access to the \'System: Group manager\' page.');
echo gettext('Allow access to the \'System: High Availability\' page.');
echo gettext('Allow access to the \'System: License\' page.');
echo gettext('Allow access to the \'System: Static Routes\' page.');
echo gettext('Allow access to the \'System: Static Routes: Edit route\' page.');
echo gettext('Allow access to the \'System: User Manager\' page.');
echo gettext('Allow access to the \'System: User Manager: Add Privileges\' page.');
echo gettext('Allow access to the \'System: User Manager: Settings: Test LDAP\' page.');
echo gettext('Allow access to the \'System: User Manager: settings\' page.');
echo gettext('Allow access to the \'System: User Password Manager\' page.');
echo gettext('Allow access to the \'VPN: IPsec\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Edit Phase 1\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Edit Phase 2\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Edit Pre-Shared Keys\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Mobile\' page.');
echo gettext('Allow access to the \'VPN: IPsec: Pre-Shared Keys List\' page.');
echo gettext('Allow access to the \'VPN: L2TP : Users\' page.');
echo gettext('Allow access to the \'VPN: L2TP\' page.');
echo gettext('Allow access to the \'VPN: L2TP: Users : Edit\' page.');
echo gettext('Allow access to the \'VPN: OpenVPN: Client Export Utility\' page.');
echo gettext('Allow access to the \'VPN: OpenVPN: Client Specific Override\' page.');
echo gettext('Allow access to the \'VPN: OpenVPN: Client\' page.');
echo gettext('Allow access to the \'VPN: OpenVPN: Server\' page.');
echo gettext('Allow access to the \'VPN: PPTP\' page.');
echo gettext('Allow access to the \'VPN: PPTP: User: Edit\' page.');
echo gettext('Allow access to the \'VPN: PPTP: Users\' page.');
echo gettext('Allow access to the \'Wizard subsystem\' page.');
echo gettext('Allow access to the \'XMLRPC Interface Stats\' page.');
echo gettext('Allow access to the \'Interfaces: Bridge\' page.');
echo gettext('Allow access to the \'System: High Availability\' page.');
echo gettext('Allow access to the \'Diagnostics: Factory defaults\' page.');
echo gettext('Allow access to the \'Services: DHCP Relay\' page.');
echo gettext('Allow access to the \'System: Firmware: Manual Update: Progress bar\' page.');
echo gettext('Allow access to the \'Services: Igmpproxy\' page.');
echo gettext('Allow access to the \'XMLRPC Library\' page.');
echo gettext('Allow access to the Hello World! module');
echo gettext('Allow direct access to all Dashboard widget pages, required for some widgets using AJAX.');
echo gettext('Allows access to the \'Diagnostics: Limiter Info\' page');
echo gettext('Allows access to the \'Diagnostics: Network Insight\' page');
echo gettext('Allows access to the \'Diagnostics: System Activity\' page');
echo gettext('Allows access to the \'Diagnostics: System Health\' page');
echo gettext('Allows access to the \'Diagnostics: pfInfo\' page');
echo gettext('Allows access to the \'Diagnostics: pfTop\' page');
echo gettext('Allows access to the Netflow configuration');
echo gettext('Create interface groups');
echo gettext('Edit Interface LAGG');
echo gettext('If present, ignores requests from this user to write config.xml.');
echo gettext('Indicates whether the user is able to login for example via SSH.');
echo gettext('Indicates whether the user is allowed to dial in via IPsec xauth (Note: Does not allow shell access, but may allow the user to create ssh tunnels)');
echo gettext('Indicates whether the user is allowed to use the proxy');
echo gettext('Uploads crash reports to the developers.');
dynamic/helpers/controllers.php
View file @ 2e4cab96
<?php
/**
* Copyright (C) 2015 Deciso B.V.
*
......@@ -32,74 +33,184 @@
* Language support, autogenerated file
*
*/
echo gettext('Enable this zone');
echo gettext('Internal number used for this zone');
echo gettext('Select interface(s) to enable for captive portal.');
echo gettext('Select authentication methods to use, leave empty for no authentication needed.');
echo gettext('Clients will be disconnected after this amount of inactivity. They may log in again immediately, though. Enter 0 to disable idle timeout.');
echo gettext('Clients will be disconnected after this amount of time, regardless of activity. They may log in again immediately, though. Enter 0 to disable hard timeout (not recommended unless an idle timeout is set).');
echo gettext('If this option is set, users can login on multiple machines at once. If disabled subsequent logins will cause machines previously logged in with the same username to be disconnected.');
echo gettext('If provided, all traffic will be transmitted over an HTTPS connection to protect against eavesdroppers.');
echo gettext('Hostname (of this machine) to redirect login page to, leave blank to use this interface IP address, otherwise make sure the client can access DNS to resolve this location. When using a SSL certificate, make sure both this name and the cert name are equal.');
echo gettext('Add servers to this backend. Use TAB key to complete typing.');
echo gettext('Add some randomness in the check interval between 0 and +/- 50%. A value between 2 and 5 seems to show good results. The default value is 0 (disabled).');
echo gettext('Adjust the server\'s weight relative to other servers.');
echo gettext('Allow HAProxy to automatically raise log level for non-completely successful connections to aid debugging.');
echo gettext('Avoid authentication for addresses and subnets in this list');
echo gettext('Avoid authentication for physical addresses in this list');
echo gettext('Use custom template package for user login');
echo gettext('Can be specified to filter outgoing messages. By default, all messages are sent. If a level is specified, only messages with a severity at least as important as this level will be sent.');
echo gettext('Change the check buffer size (in bytes). Higher values may help find string or regex patterns in very large pages, though doing so may imply more memory and CPU usage. The default value is 16384.');
echo gettext('Choose a TCP port to be used for the local statistics page. The default value is 8822.');
echo gettext('Choose actions to be included in this backend.');
echo gettext('Choose actions to be included in this frontend.');
echo gettext('Choose an action that should be executed if the condition is true.');
echo gettext('Choose an logical operator to be used to form a condition.');
echo gettext('Choose error files to be included in this backend.');
echo gettext('Choose how to test. By using IF it tests if the condition evaluates to true. If you use UNLESS, the sense of the test is reversed.');
echo gettext('Choose one of the 24 standard syslog facilities. The default value is local0.');
echo gettext('Clients will be disconnected after this amount of inactivity. They may log in again immediately, though. Enter 0 to disable idle timeout.');
echo gettext('Clients will be disconnected after this amount of time, regardless of activity. They may log in again immediately, though. Enter 0 to disable hard timeout (not recommended unless an idle timeout is set).');
echo gettext('Collect netflow data on this firewall, this will automatically append localhost as netflow target');
echo gettext('Configure listen addresses for the statistics page to enable remote access, i.e. 10.0.0.1:8080 or haproxy.example.com:8999. Use TAB key to complete typing a listen address.');
echo gettext('Configure listen addresses for this frontend, i.e. 127.0.0.1:8080 or www.example.com:443. Use TAB key to complete typing a listen address.');
echo gettext('Connections coming from (src) or going to (dst) listed countries, default selects both ');
echo gettext('Cookie name to use for stick table (if appropiate table type is selected).');
echo gettext('Countries to alert or block using GeoIP');
echo gettext('Default ttl');
echo gettext('Description for this ACL.');
echo gettext('Description for this Lua script.');
echo gettext('Description for this action.');
echo gettext('Description for this backend.');
echo gettext('Description for this error file.');
echo gettext('Description for this frontend.');
echo gettext('Description for this server.');
echo gettext('Description to identify this pipe.');
echo gettext('Description to identify this zone.');
echo gettext('Select if job is enabled or not');
echo gettext('Enter the minutes for the job to act, can also be a comma separated list, * (each) or a range (ex. 10,20,30 or 10-30)');
echo gettext('Enter the hours for the job to act, can also be a comma separated list, * (each) or a range (ex. 10,11,12 or 10-12)');
echo gettext('Enter the days of the month for the job to act, can also be a comma separated list, * (each) or a range (ex. 1,20,28 or 1-28)');
echo gettext('Enter the months for the job to act, can also be a comma separated list, * (each) or a range (ex. 1,2,3 or 1-3)');
echo gettext('Enter the days of the week for the job to act, can also be a comma separated list, * (each) or a range (ex. 1,2,3 or 1-3)');
echo gettext('Select the command that needs to be executed at given time frame.');
echo gettext('Enter parameters for this job if required.');
echo gettext('Enable HAProxy\'s statistics page.');
echo gettext('Enable SSL offloading');
echo gettext('Enable access logging.');
echo gettext('Enable insertion of the X-Forwarded-For header to requests sent to servers.');
echo gettext('Enable or disable SSL communication with this server.');
echo gettext('Enable or disable collecting & providing separate statistics for each socket.');
echo gettext('Enable or disable health checking.');
echo gettext('Enable or disable logging of connections with no data.');
echo gettext('Enable or disable logging of normal, successful connections.');
echo gettext('Enable or disable session redistribution in case of connection failure.');
echo gettext('Enable or disable the HAProxy service.');
echo gettext('Enable or disable the proxy service.');
echo gettext('Enable or disable traffic management.');
echo gettext('Enable or disable verbose logging. Each log line turns into a much richer format.');
echo gettext('Enable store logging.');
echo gettext('Enable this Lua script.');
echo gettext('Enable this backend');
echo gettext('Enable this feature');
echo gettext('Enable this frontend');
echo gettext('Enable this zone');
echo gettext('Enable to log health check status updates.');
echo gettext('Enable transparent ftp proxy mode to forward all requests for destination port 21 to the proxy server without any additional configuration.');
echo gettext('Enter a description to explain what this blacklist is intended for.');
echo gettext('Enter a description to explain what this job is intended for.');
echo gettext('set action to perform here, only used when in IPS mode');
echo gettext('enable IDS');
echo gettext('Select interface(s) to use.');
echo gettext('Select if job is enabled or not');
echo gettext('Enter a filename for storing the blacklist.');
echo gettext('Enter a number followed by one of the supported suffixes "d" (days), "h" (hour), "m" (minute), "s" (seconds), "ms" (miliseconds). This configures the maximum duration of an entry in the stick-table since it was last created, refreshed or matched. The maximum duration is slightly above 24 days.');
echo gettext('Enter a number followed by one of the supported suffixes "k", "m", "g". This configures the maximum number of entries that can fit in the table. This value directly impacts memory usage. Count approximately 50 bytes per entry, plus the size of a string if any.');
echo gettext('Enter an url to fetch the blacklist from.');
echo gettext('Enter a description to explain what this blacklist is intended for.');
echo gettext('Enable or disable the proxy service.');
echo gettext('The port number where Squid sends and receives ICP queries to and from neighbor caches. Leave blank to disable (default). The standard UDP port for ICP is 3130.');
echo gettext('Enable access logging.');
echo gettext('Enable store logging.');
echo gettext('If set (default), Squid will include a Via header in requests and
replies as required by RFC2616.');
echo gettext('Select what to do with X-Forwarded for header.');
echo gettext('Suppress Squid version string info in HTTP headers and HTML error pages.');
echo gettext('Enter parameters for this job if required.');
echo gettext('Enter the allowed overall bandtwith in kilobits per second (leave empty to disable).');
echo gettext('Enter the allowed per host bandwidth in kilobits per second (leave empty to disable).');
echo gettext('Enter the cache memory size to use.');
echo gettext('Enter the storage size for the local cache (default is 100).');
echo gettext('Enter the number of first-level subdirectories for the local cache (default is 16).');
echo gettext('Enter the number of first-level subdirectories for the local cache (default is 256).');
echo gettext('Enable or disable traffic management.');
echo gettext('Enter the days of the month for the job to act, can also be a comma separated list, * (each) or a range (ex. 1,20,28 or 1-28)');
echo gettext('Enter the days of the week for the job to act, can also be a comma separated list, * (each) or a range (ex. 1,2,3 or 1-3)');
echo gettext('Enter the hours for the job to act, can also be a comma separated list, * (each) or a range (ex. 10,11,12 or 10-12)');
echo gettext('Enter the maximum size (in MB) to use for SSL certificates.');
echo gettext('Enter the maxium size for downloads in kilobytes (leave empty to disable).');
echo gettext('Enter the maxium size for uploads in kilobytes (leave empty to disable).');
echo gettext('Enter the allowed overall bandtwith in kilobits per second (leave empty to disable).');
echo gettext('Enter the allowed per host bandwidth in kilobits per second (leave empty to disable).');
echo gettext('Select interface(s) the proxy will bind to.');
echo gettext('The port the proxy service will listen to.');
echo gettext('When enabled the subnets of the selected interfaces will be added to the allow access list.');
echo gettext('Enter the minutes for the job to act, can also be a comma separated list, * (each) or a range (ex. 10,20,30 or 10-30)');
echo gettext('Enter the months for the job to act, can also be a comma separated list, * (each) or a range (ex. 1,2,3 or 1-3)');
echo gettext('Enter the number of first-level subdirectories for the local cache (default is 16).');
echo gettext('Enter the number of first-level subdirectories for the local cache (default is 256).');
echo gettext('Enter the number of ssl certificate workers to use (sslcrtd_children).');
echo gettext('Enter the size of the preview wich is sent to the ICAP server.');
echo gettext('Enter the storage size for the local cache (default is 100).');
echo gettext('Enter the url where the reqmod requests should be sent to.');
echo gettext('Enter the url where the respmod requests should be sent to.');
echo gettext('Filter to use when downloading this ruleset, applies this action to all incoming lines');
echo gettext('Grant access to HAProxy statistics page. Please provide both user and password in clear text separated by a \':\', i.e. john:secret123 or jdoe:anonymous. Use TAB key to complete adding a user.');
echo gettext('Hostname (of this machine) to redirect login page to, leave blank to use this interface IP address, otherwise make sure the client can access DNS to resolve this location. When using a SSL certificate, make sure both this name and the cert name are equal.');
echo gettext('If provided, all traffic will be transmitted over an HTTPS connection to protect against eavesdroppers.');
echo gettext('If set (default), Squid will include a Via header in requests and
replies as required by RFC2616.');
echo gettext('If this checkbox is checked, you can use an ICAP server to filter or replace content.');
echo gettext('If this option is set, users can login on multiple machines at once. If disabled subsequent logins will cause machines previously logged in with the same username to be disconnected.');
echo gettext('If you enable this option, the client IP address will be sent to the ICAP server. This can be useful if you want to filter traffic based on IP addresses.');
echo gettext('If you enable this option, the username of the client will be sent to the ICAP server. This can be useful if you want to filter traffic based on usernames addresses. Note, that authentication is required to use usernames.');
echo gettext('If you use previews, only a part of the data is sent to the ICAP server. Setting this option can improve the performance. ');
echo gettext('Indicates where to send the logs. Takes an IPv4 or IPv6 address optionally followed by a colon (\':\') and a UDP port, i.e. 127.0.0.1 or 10.0.0.1:514');
echo gettext('Internal number used for this zone');
echo gettext('Name to identify this ACL.');
echo gettext('Name to identify this Lua script.');
echo gettext('Name to identify this action.');
echo gettext('Name to identify this backend.');
echo gettext('Name to identify this error file.');
echo gettext('Name to identify this frontend.');
echo gettext('Name to identify this server.');
echo gettext('Paste the content of your Lua script here.');
echo gettext('Paste the content of your errorfile here. The files should not exceed the configured buffer size, which generally is 8 or 16 kB.');
echo gettext('Provide either the FQDN or the IP address of this server.');
echo gettext('Provide the TCP communication port for this server, i.e. 80 or 443.');
echo gettext('Select Authentication method');
echo gettext('Select HTTP method for health check.');
echo gettext('Select HTTP version for a HTTP health check.');
echo gettext('Select authentication methods to use, leave empty for no authentication needed.');
echo gettext('Select destinations to send netflow data to (ip address:port, eg 192.168.0.1:2550).');
echo gettext('Select health check expression.');
echo gettext('Select health check for servers in this backend.');
echo gettext('Select if job is enabled or not');
echo gettext('Select interface(s) the ftp proxy will bind to.');
echo gettext('Select interface(s) the proxy will bind to.');
echo gettext('Select interface(s) to enable for captive portal.');
echo gettext('Select interface(s) to enable netflow on.');
echo gettext('Select interface(s) to use.');
echo gettext('Select interfaces used for wan traffic to avoid counting nat traffic twice');
echo gettext('Select interval (in milliseconds) between two consecutive health checks.');
echo gettext('Select netflow version to use.');
echo gettext('Select one ore more ACLs to be used as condition for this action.');
echo gettext('Select the command that needs to be executed at given time frame.');
echo gettext('Select type of health check.');
echo gettext('Select what to do with X-Forwarded for header.');
echo gettext('Set the default backend to use for this frontend.');
echo gettext('Set the maximum inactivity time (in milliseconds) on the client side.');
echo gettext('Set the maximum inactivity time (in milliseconds) on the server side.');
echo gettext('Set the maximum number of concurrent connections for this frontend.');
echo gettext('Set the maximum object size (default 4MB when left empty).');
echo gettext('Set the maximum time (in milliseconds) to wait for a connection attempt to a server to succeed.');
echo gettext('Set the number of retries to perform on a server after a connection failure (default is 3).');
echo gettext('Set the number of retries to perform on a server after a connection failure.');
echo gettext('Set the running mode or protocol for this frontend.');
echo gettext('Set the running mode or protocol of the backend. Usually the frontend and the backend are in the same mode.');
echo gettext('Sets the interval (in milliseconds) for running health checks on the server.');
echo gettext('Sets the maximum amount of RAM in megabytes per process usable by Lua. By default it is zero which means unlimited. It is important to set a limit to ensure that a bug in a script will not result in the system running out of memory.');
echo gettext('Sets the operation mode to use for this server.');
echo gettext('Specify HTTP host to use for health check. Requires HTTP/1.1.');
echo gettext('Specify HTTP request URI for health check.');
echo gettext('Specify a value to match with the action.');
echo gettext('Specify a value to match with the expression.');
echo gettext('Specify an optional maximum line length. Log lines larger than this value will be truncated before being sent. The reason is that syslog servers act differently on log line length. All servers support the default value of 1024, but some servers simply drop larger lines while others do log them.');
echo gettext('Specify the TCP port used for agent checks.');
echo gettext('Specify the domain name to present to the server for SMTP/ESMTP health checks.');
echo gettext('Specify the username to be used for database health checks.');
echo gettext('Suppress Squid version string info in HTTP headers and HTML error pages.');
echo gettext('The header which should be used to send the username to the ICAP server.');
echo gettext('The maximum number of characters that will be stored in the stick table (if appropiate table type is selected).');
echo gettext('The port number where Squid sends and receives ICP queries to and from neighbor caches. Leave blank to disable (default). The standard UDP port for ICP is 3130.');
echo gettext('The port the proxy service will listen to.');
echo gettext('Select Authentication method');
echo gettext('The port the ssl proxy service will listen to.');
echo gettext('The prompt will be displayed in the authentication request window.');
echo gettext('The total number of authenticator processes to spawn.');
echo gettext('enable this pipe and it\'s related queues and rules');
echo gettext('This is the email address displayed in error messages to the users.');
echo gettext('This is the hostname to be displayed in proxy server error messages.');
echo gettext('Total bandwidth for this pipe');
echo gettext('number of dynamic queues, leave empty for default');
echo gettext('Description to identify this pipe.');
echo gettext('enable this queue and it\'s related rules');
echo gettext('connected pipe for this queue');
echo gettext('Use custom template package for user login');
echo gettext('Use this option if your usernames need to be encoded.');
echo gettext('Use this to invert the meaning of the expression.');
echo gettext('Weight of this queue (1..100), used to prioritize within a pipe. (1 is low, 100 is high)');
echo gettext('Description to identify this pipe.');
echo gettext('order in which the rule will be evaluated (lowest first)');
echo gettext('secondary interface, matches packets going traveling from interface (1) to interface (2).
');
echo gettext('source ip or network, examples 10.0.0.0/24, 10.0.0.1');
echo gettext('source port number or well known name (imap,imaps, http,https,...)');
echo gettext('When enabled the subnets of the selected interfaces will be added to the allow access list.');
echo gettext('connected pipe for this queue');
echo gettext('destination ip or network, examples 10.0.0.0/24, 10.0.0.1');
echo gettext('destination port number or well known name (imap,imaps, http,https,...)');
echo gettext('enable IDS');
echo gettext('enable ruleset');
echo gettext('enable this fingerprint rule');
echo gettext('enable this pipe and it\'s related queues and rules');
echo gettext('enable this queue and it\'s related rules');
echo gettext('ip address of the mail host');
echo gettext('matches incoming or outgoing packets or both (default)');
echo gettext('number of dynamic queues, leave empty for default');
echo gettext('order in which the rule will be evaluated (lowest first)');
echo gettext('secondary interface, matches packets traveling to/from interface (1) to/from interface (2). can be combined with direction.');
echo gettext('select categories to use, leave empty for all. Categories are visible after initial download.');
echo gettext('set action to perform here, only used when in IPS mode');
echo gettext('source ip or network, examples 10.0.0.0/24, 10.0.0.1');
echo gettext('source port number or well known name (imap,imaps, http,https,...)');
echo gettext('target pipe or queue');
echo gettext('the SSL fingerprint, for example B5:E1:B3:70:5E:7C:FF:EB:92:C4:29:E5:5B:AC:2F:AE:70:17:E9:9E');
dynamic/helpers/models.php
View file @ 2e4cab96
<?php
/**
* Copyright (C) 2015 Deciso B.V.
*
......@@ -32,353 +33,293 @@
* Language support, autogenerated file
*
*/
echo gettext('Root');
echo gettext('Dashboard');
echo gettext('License');
echo gettext('Password');
echo gettext('Logout');
echo gettext('Lobby');
echo gettext('workAround');
echo gettext('Certificates');
echo gettext('workAround');
echo gettext('Authorities');
echo gettext('workAround');
echo gettext('Revocation');
echo gettext('Trust');
echo gettext('none');
echo gettext('History');
echo gettext('Backups');
echo gettext('Configuration');
echo gettext('Crash Reporter');
echo gettext('Firmware');
echo gettext('Synchronization');
echo gettext('CARP Status');
echo gettext('High Availability');
echo gettext('Edit');
echo gettext('All');
echo gettext('Status');
echo gettext('Log File');
echo gettext('Routes');
echo gettext('All');
echo gettext('Edit');
echo gettext('All');
echo gettext('Status');
echo gettext('Edit');
echo gettext('Group');
echo gettext('Group Status');
echo gettext('Log File');
echo gettext('Gateways');
echo gettext('General');
echo gettext('Admin Access');
echo gettext('Networking');
echo gettext('Firewall/NAT');
echo gettext('Notifications');
echo gettext('Logs/Reports');
echo gettext('Miscellaneous');
echo gettext('Edit');
echo gettext('Tunables');
echo gettext('Settings');
echo gettext('Log File');
echo gettext('Step');
echo gettext('Wizard');
echo gettext('All');
echo gettext('Privileges');
echo gettext('Users');
echo gettext('All');
echo gettext('Privileges');
echo gettext('Groups');
echo gettext('Settings');
echo gettext('Edit');
echo gettext('Servers');
echo gettext('Tester');
echo gettext('A SSL fingerprint should be a 59 character long hex value');
echo gettext('ACL');
echo gettext('ACLs');
echo gettext('ARP Table');
echo gettext('Access');
echo gettext('Factory Defaults');
echo gettext('Halt System');
echo gettext('Reboot System');
echo gettext('SMART Status');
echo gettext('Access Lists');
echo gettext('Act');
echo gettext('Actions');
echo gettext('Administration');
echo gettext('Advanced');
echo gettext('Advanced Settings');
echo gettext('Aliases');
echo gettext('All');
echo gettext('Services');
echo gettext('Diagnostics');
echo gettext('System');
echo gettext('Overview');
echo gettext('Assignments');
echo gettext('Edit');
echo gettext('Auth');
echo gettext('Authorities');
echo gettext('Backends');
echo gettext('Backups');
echo gettext('Bandwidth metric should be one of bit,Kbit,Mbit');
echo gettext('Bandwidth out of range');
echo gettext('Bridge');
echo gettext('Edit');
echo gettext('GIF');
echo gettext('Edit');
echo gettext('GRE');
echo gettext('Edit');
echo gettext('Group');
echo gettext('Edit');
echo gettext('LAGG');
echo gettext('Edit');
echo gettext('QinQ');
echo gettext('Edit');
echo gettext('VLAN');
echo gettext('Other Types');
echo gettext('Edit');
echo gettext('Devices');
echo gettext('Log File');
echo gettext('Point-to-Point');
echo gettext('Edit');
echo gettext('Devices');
echo gettext('Log File');
echo gettext('Status');
echo gettext('Status');
echo gettext('Wireless');
echo gettext('DNS Lookup');
echo gettext('Packet Capture');
echo gettext('Ping');
echo gettext('Test Port');
echo gettext('Traceroute');
echo gettext('CARP Status');
echo gettext('Cache');
echo gettext('Captive Portal');
echo gettext('Certificates');
echo gettext('Client Export');
echo gettext('Client Specific Overrides');
echo gettext('Clients');
echo gettext('Commercial Support');
echo gettext('Configuration');
echo gettext('Connection Status');
echo gettext('Counters');
echo gettext('Credentials TTL needs to be an integer value above 0');
echo gettext('DHCP');
echo gettext('DHCPv6');
echo gettext('DNS Forwarder');
echo gettext('DNS Resolver');
echo gettext('DNS Tools');
echo gettext('Dashboard');
echo gettext('Defaults');
echo gettext('Description should be a string between 1 and 255 characters');
echo gettext('Details');
echo gettext('Traffic Graph');
echo gettext('Detault Parameters');
echo gettext('Devices');
echo gettext('Diagnostics');
echo gettext('Interfaces');
echo gettext('Edit');
echo gettext('NoneEdit');
echo gettext('None');
echo gettext('All');
echo gettext('Edit');
echo gettext('IPs');
echo gettext('Edit');
echo gettext('Ports');
echo gettext('Documentation');
echo gettext('Does not look like a valid cookie name (most special characters are not allowed).');
echo gettext('Domains');
echo gettext('DynDNS');
echo gettext('Dynamic View');
echo gettext('Edit');
echo gettext('URLs');
echo gettext('Import');
echo gettext('Aliases');
echo gettext('RulesEdit');
echo gettext('Floating');
echo gettext('Interface');
echo gettext('Rules');
echo gettext('NatEdit');
echo gettext('Port Forward');
echo gettext('OneOnOneEdit');
echo gettext('1:1');
echo gettext('OutboundEdit');
echo gettext('Outbound');
echo gettext('NPTEdit');
echo gettext('NPT (IPv6)');
echo gettext('NAT');
echo gettext('Status');
echo gettext('TrafficShaper');
echo gettext('VirtualIPEdit');
echo gettext('Virtual IPs');
echo gettext('SchedulesEdit');
echo gettext('Schedules');
echo gettext('Filter Reload');
echo gettext('pfInfo');
echo gettext('pfTop');
echo gettext('Details');
echo gettext('pfTables');
echo gettext('SocketsDetails');
echo gettext('Sockets');
echo gettext('States Dump');
echo gettext('States Reset');
echo gettext('States Summary');
echo gettext('Enter a description.');
echo gettext('Enter valid parameter(s) for the chosen command (Found illegal characters).');
echo gettext('Error Files');
echo gettext('FTP');
echo gettext('FTP Proxy port needs to be an integer value between 1 and 65535');
echo gettext('File content should be in (base64 encoded) zip format');
echo gettext('Fileid should be an internally generated unique number');
echo gettext('Filter');
echo gettext('Source Tracking');
echo gettext('Diagnostics');
echo gettext('Normal View');
echo gettext('Dynamic View');
echo gettext('Summary View');
echo gettext('Plain View');
echo gettext('Log Files');
echo gettext('Filter Reload');
echo gettext('Firewall');
echo gettext('Tab');
echo gettext('Edit');
echo gettext('Server');
echo gettext('Relay');
echo gettext('Details');
echo gettext('Leases');
echo gettext('Log File');
echo gettext('DHCP');
echo gettext('Edit');
echo gettext('RA');
echo gettext('Server');
echo gettext('Relay');
echo gettext('Details');
echo gettext('Leases');
echo gettext('DHCPv6');
echo gettext('Hosts');
echo gettext('Domains');
echo gettext('DNS Forwarder');
echo gettext('Firmware');
echo gettext('Floating');
echo gettext('Forward');
echo gettext('Frontends');
echo gettext('GIF');
echo gettext('GPS');
echo gettext('GRE');
echo gettext('Gateways');
echo gettext('General');
echo gettext('Global Parameters');
echo gettext('Group');
echo gettext('Group Status');
echo gettext('Groups');
echo gettext('HAProxy');
echo gettext('Hard timeout must be between 0(no timeout) and 10080 (a week)');
echo gettext('Health');
echo gettext('Health Checks');
echo gettext('Hello World!');
echo gettext('Help');
echo gettext('High Availability');
echo gettext('History');
echo gettext('Hosts');
echo gettext('Domains');
echo gettext('Overrides');
echo gettext('Advanced');
echo gettext('All');
echo gettext('Access Lists');
echo gettext('DNS Resolver');
echo gettext('Edit');
echo gettext('DynDNS');
echo gettext('Filter');
echo gettext('Log File');
echo gettext('Edit');
echo gettext('RFC 2136');
echo gettext('DNS Tools');
echo gettext('IGMPProxyEdit');
echo gettext('ICAP');
echo gettext('ICP port needs to be an integer value between 1 and 65535');
echo gettext('IGMP Proxy');
echo gettext('Edit');
echo gettext('Monitors');
echo gettext('Edit');
echo gettext('Pool Setup');
echo gettext('Pool Status');
echo gettext('Settings');
echo gettext('Log File');
echo gettext('Edit');
echo gettext('Virtual Server Setup');
echo gettext('Virtual Server Status');
echo gettext('Load Balancer');
echo gettext('General');
echo gettext('GPS');
echo gettext('PPS');
echo gettext('Status');
echo gettext('Log File');
echo gettext('Network Time');
echo gettext('Edit');
echo gettext('Settings');
echo gettext('Type');
echo gettext('Log File');
echo gettext('PPPoE Server');
echo gettext('More');
echo gettext('Log File');
echo gettext('Proxy');
echo gettext('SNMP');
echo gettext('Edit');
echo gettext('Settings');
echo gettext('Status');
echo gettext('Universal Plug and Play');
echo gettext('WoLEdit');
echo gettext('Wake on LAN');
echo gettext('Services');
echo gettext('Phase1');
echo gettext('Phase2');
echo gettext('Tunnel Settings');
echo gettext('Mobile Clients');
echo gettext('Edit');
echo gettext('Pre-Shared Keys');
echo gettext('Advanced Settings');
echo gettext('Act');
echo gettext('Status Overview');
echo gettext('Lease Status');
echo gettext('Security Association Database');
echo gettext('Security Policy Database');
echo gettext('Log File');
echo gettext('IGMPProxyEdit');
echo gettext('IPsec');
echo gettext('Settings');
echo gettext('Edit');
echo gettext('Users');
echo gettext('Type');
echo gettext('Log File');
echo gettext('Idle timeout must be between 0(no timeout) and 10080 (a week)');
echo gettext('Import');
echo gettext('Insight');
echo gettext('Interface');
echo gettext('Interfaces');
echo gettext('Intrusion Detection');
echo gettext('L2TP');
echo gettext('Edit');
echo gettext('Server Settings');
echo gettext('Edit');
echo gettext('Client Settings');
echo gettext('Edit');
echo gettext('Client Specific Overrides');
echo gettext('Edit');
echo gettext('Client Export');
echo gettext('Shared Key Export');
echo gettext('Connection Status');
echo gettext('LAGG');
echo gettext('Lease Status');
echo gettext('Leases');
echo gettext('License');
echo gettext('Load Balancer');
echo gettext('Lobby');
echo gettext('Log File');
echo gettext('Log Files');
echo gettext('Logging');
echo gettext('Logging Configuration');
echo gettext('Logout');
echo gettext('Lookup');
echo gettext('Lua Scripts');
echo gettext('Maximum number of zones reached');
echo gettext('Miscellaneous');
echo gettext('Mobile Clients');
echo gettext('Monitors');
echo gettext('More');
echo gettext('NAT');
echo gettext('NDP Table');
echo gettext('NPT (IPv6)');
echo gettext('NetFlow');
echo gettext('Network Time');
echo gettext('Normal View');
echo gettext('Notifications');
echo gettext('Number of children needs to be an integer value above 0');
echo gettext('One-to-One');
echo gettext('OpenVPN');
echo gettext('Settings');
echo gettext('Edit');
echo gettext('Users');
echo gettext('Type');
echo gettext('Log File');
echo gettext('Origin should be regular text of max 30 characters');
echo gettext('Other Types');
echo gettext('Outbound');
echo gettext('Overrides');
echo gettext('Overview');
echo gettext('PPPoE');
echo gettext('PPS');
echo gettext('PPTP');
echo gettext('VPN');
echo gettext('About this Page');
echo gettext('Developers Wiki');
echo gettext('Documentation');
echo gettext('FreeBSD Handbook');
echo gettext('Paid Support');
echo gettext('User Forum');
echo gettext('Help');
echo gettext('menu');
echo gettext('Administration');
echo gettext('Sessions');
echo gettext('Vouchers');
echo gettext('Log File');
echo gettext('Captive Portal');
echo gettext('Services');
echo gettext('menu');
echo gettext('Maximum number of zones reached');
echo gettext('Idle timeout must be between 0(no timeout) and 10080 (a week)');
echo gettext('Hard timeout must be between 0(no timeout) and 10080 (a week)');
echo gettext('Please select a valid certificate from the list');
echo gettext('Packet Capture');
echo gettext('Password');
echo gettext('Phase1');
echo gettext('Phase2');
echo gettext('Ping');
echo gettext('Pipe number must be between 1...65535');
echo gettext('Pipes');
echo gettext('Plain View');
echo gettext('Please enter a valid email address.');
echo gettext('Please enter a valid servername, ip address or leave this option blank');
echo gettext('Please enter a valid servername, ip address or leave this option blank.');
echo gettext('Please enter ip addresses or domain names here');
echo gettext('Please enter valid addresses');
echo gettext('Please enter valid mac addresses');
echo gettext('Please enter valid targets (e.g. 192.168.0.1:2055)');
echo gettext('Please provide a valid host, i.e. 127.0.0.1 or 10.0.0.1:514.');
echo gettext('Please provide a valid listen address, i.e. 10.0.0.1:8080 or haproxy.example.com:8999.');
echo gettext('Please provide a valid listen address, i.e. 127.0.0.1:8080 or www.example.com:443.');
echo gettext('Please provide a valid user and password, i.e. user:secret123.');
echo gettext('Please select a valid certificate from the list');
echo gettext('Please select a valid certificate from the list.');
echo gettext('Please specify a valid servername or IP address.');
echo gettext('Please specify a value between 0 and 1024.');
echo gettext('Please specify a value between 0 and 256.');
echo gettext('Please specify a value between 0 and 50.');
echo gettext('Please specify a value between 1 and 100.');
echo gettext('Please specify a value between 1 and 10000.');
echo gettext('Please specify a value between 1 and 1000000.');
echo gettext('Please specify a value between 1 and 128.');
echo gettext('Please specify a value between 1 and 500000.');
echo gettext('Please specify a value between 1 and 65535.');
echo gettext('Please specify a value between 100 and 1000000.');
echo gettext('Please specify a value between 1024 and 1048576.');
echo gettext('Please specify a value between 1024 and 16384.');
echo gettext('Please specify a value between 1024 and 65535.');
echo gettext('Please specify a value between 250 and 1000000.');
echo gettext('Please specify a value between 500 and 100000.');
echo gettext('Please specify a value between 64 and 65535.');
echo gettext('Point-to-Point');
echo gettext('Pool Setup');
echo gettext('Pool Status');
echo gettext('Port Forward');
echo gettext('Power Off');
echo gettext('Pre-Shared Keys');
echo gettext('Privileges');
echo gettext('Proxy Server');
echo gettext('Proxy port needs to be an integer value between 1 and 65535');
echo gettext('QinQ');
echo gettext('Queue number must be between 1...65535');
echo gettext('Queues');
echo gettext('RA');
echo gettext('RFC 2136');
echo gettext('Reboot');
echo gettext('Related cron not found');
echo gettext('Related item not found');
echo gettext('Related pipe not found');
echo gettext('Related pipe or queue not found');
echo gettext('Related template not found');
echo gettext('Description should be a string between 1 and 255 characters');
echo gettext('Fileid should be an internally generated unique number');
echo gettext('Template name should be a string between 1 and 255 characters');
echo gettext('File content should be in (base64 encoded) zip format');
echo gettext('Origin should be regular text of max 30 characters');
echo gettext('Value needs to be between 0 and 59, multiple values, ranges and * are supported (ex. 1,10,20,30 or 1-30 )');
echo gettext('Value needs to be between 0 and 23, multiple values, ranges and * are supported (ex. 1,2,8 or 0-8 )');
echo gettext('Value needs to be between 1 and 31, multiple values, ranges, L (last day of month) and * are supported (ex. 1,2,8 or 1-28 )');
echo gettext('Value needs to be between 1 and 12 or JAN to DEC, multiple values, ranges and * are supported (ex. JAN,2,10 or 3-8 )');
echo gettext('Value needs to be between 0 and 6 ( Sunday to Saturday), multiple values, ranges and * are supported (ex. 1,2,4 or 0-4 ) ');
echo gettext('Relay');
echo gettext('RemoteACL');
echo gettext('Reporter');
echo gettext('Reporting');
echo gettext('Revocation');
echo gettext('Root');
echo gettext('Routes');
echo gettext('Rules');
echo gettext('RulesEdit');
echo gettext('SMART');
echo gettext('SNMP');
echo gettext('SSL Proxy port needs to be an integer value between 1 and 65535');
echo gettext('Schedules');
echo gettext('SchedulesEdit');
echo gettext('Security Association Database');
echo gettext('Security Policy Database');
echo gettext('Select a command from the list.');
echo gettext('Enter valid parameter(s) for the chosen command (Found illegal characters).');
echo gettext('Enter a description.');
echo gettext('Intrusion Detection');
echo gettext('Services');
echo gettext('menu');
echo gettext('sid should be a number');
echo gettext('Related cron not found');
echo gettext('Administration');
echo gettext('Proxy Server');
echo gettext('Server');
echo gettext('Servers');
echo gettext('Service Settings');
echo gettext('Services');
echo gettext('menu');
echo gettext('ICP port needs to be an integer value between 1 and 65535');
echo gettext('Specify a positive memory cache size. (number of MB\'s)');
echo gettext('Sessions');
echo gettext('Settings');
echo gettext('Shared Key Export');
echo gettext('Should be a number between 1 and 5 characters followed by either "d", "h", "m", "s" or "ms".');
echo gettext('Should be a number between 1 and 5 characters followed by either "k", "m" or "g".');
echo gettext('Should be a string between 1 and 255 characters.');
echo gettext('Sockets');
echo gettext('SocketsDetails');
echo gettext('Specify a maximum object size. (number of MB\'s)');
echo gettext('Specify a positive cache size. (number of MB\'s)');
echo gettext('Specify a positive memory cache size. (number of MB\'s)');
echo gettext('Specify a positive number of first-level subdirectories.');
echo gettext('Specify a positive number of second-level subdirectories.');
echo gettext('Specify the maximum download size. (number of KBs)');
echo gettext('Specify the maximum upload size. (number of KBs)');
echo gettext('Specify the overall bandwidth for downloads in kilobits per second.');
echo gettext('Specify the per host bandwidth for downloads in kilobits per second.');
echo gettext('Proxy port needs to be an integer value between 1 and 65535');
echo gettext('FTP Proxy port needs to be an integer value between 1 and 65535');
echo gettext('States Dump');
echo gettext('States Reset');
echo gettext('States Summary');
echo gettext('Statistics');
echo gettext('Statistics Configuration');
echo gettext('Status');
echo gettext('Status Overview');
echo gettext('Step');
echo gettext('Stick Tables');
echo gettext('Summary View');
echo gettext('Synchronization');
echo gettext('System');
echo gettext('Tab');
echo gettext('Template name should be a string between 1 and 255 characters');
echo gettext('Test Port');
echo gettext('Tester');
echo gettext('The burst value is an integer and represent a number of bytes.');
echo gettext('The filename may only contain letters,digits and one dot (not required).');
echo gettext('This does not look like a valid url.');
echo gettext('Related cron not found');
echo gettext('Credentials TTL needs to be an integer value above 0');
echo gettext('Number of children needs to be an integer value above 0');
echo gettext('Health');
echo gettext('Activity Monitor');
echo gettext('Diagnostics');
echo gettext('System');
echo gettext('ARP Table');
echo gettext('NDP Table');
echo gettext('Diagnostics');
echo gettext('Interfaces');
echo gettext('menu');
echo gettext('Settings');
echo gettext('Traceroute');
echo gettext('Traffic Graph');
echo gettext('Traffic Shaper');
echo gettext('Firewall');
echo gettext('menu');
echo gettext('Pipe number must be between 1...65535');
echo gettext('Bandwidth out of range');
echo gettext('Bandwidth metric should be one of bit,Kbit,Mbit');
echo gettext('The burst value is an integer and represent a number of bytes.');
echo gettext('queue size should be between 2...100');
echo gettext('origin should be regular text of max 30 characters');
echo gettext('Description should be a string between 1 and 255 characters');
echo gettext('Queue number must be between 1...65535');
echo gettext('Related pipe not found');
echo gettext('TrafficManagement');
echo gettext('Trust');
echo gettext('Tunables');
echo gettext('Tunnel Settings');
echo gettext('Type');
echo gettext('Universal Plug and Play');
echo gettext('Updates');
echo gettext('User Forum');
echo gettext('Users');
echo gettext('VLAN');
echo gettext('VPN');
echo gettext('Value needs to be between 0 and 23, multiple values, ranges and * are supported (ex. 1,2,8 or 0-8 )');
echo gettext('Value needs to be between 0 and 59, multiple values, ranges and * are supported (ex. 1,10,20,30 or 1-30 )');
echo gettext('Value needs to be between 0 and 6 ( Sunday to Saturday), multiple values, ranges and * are supported (ex. 1,2,4 or 0-4 ) ');
echo gettext('Value needs to be between 1 and 12 or JAN to DEC, multiple values, ranges and * are supported (ex. JAN,2,10 or 3-8 )');
echo gettext('Value needs to be between 1 and 31, multiple values, ranges, L (last day of month) and * are supported (ex. 1,2,8 or 1-28 )');
echo gettext('View');
echo gettext('Virtual IPs');
echo gettext('Virtual Server Setup');
echo gettext('Virtual Server Status');
echo gettext('VirtualIPEdit');
echo gettext('Vouchers');
echo gettext('Wake on LAN');
echo gettext('Weight must be between 1...100');
echo gettext('Description should be a string between 1 and 255 characters');
echo gettext('Wireless');
echo gettext('Wizard');
echo gettext('WoLEdit');
echo gettext('Wol');
echo gettext('max size needs to be an integer value between 1 and 65535');
echo gettext('menu');
echo gettext('none');
echo gettext('origin should be regular text of max 30 characters');
echo gettext('pfInfo');
echo gettext('pfTables');
echo gettext('pfTop');
echo gettext('please specify a valid email address');
echo gettext('provide a valid sequence for sorting');
echo gettext('Related pipe or queue not found');
echo gettext('origin should be regular text of max 30 characters');
echo gettext('queue size should be between 2...100');
echo gettext('sid should be a number');
echo gettext('the number of sslrtd children needs to be an integer value between 1 and 32');
echo gettext('workAround');
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment

Technounit-GROUP 2023